Friday, March 22, 2013

Flag Progress:From paper to fabric in one easy motion -

If anyone out there knows of a better way to do this - please! Speak up! Share your knowledge.  Meanwhile, I continue to stumble down the Flag Road left to my own devices.  Since the intended design involves two blocks there is a little matter of registration.  The problem has been how to get the fabric down onto the registration jig in the right place since it is floppy, you know.  So, I went back to when I was doing the large hanga prints and managed to get the floppy paper down by using a carrier sheet.  But, how to get the fabric onto the block with a carrier sheet.  My solution is to use an easy tack adhesive, intended for moving paste-ups and such around.  I sprayed the carrier sheet with the Easy Tack:


So far, so good.  I can flip this over and the fabric doesn't flop to the counter top.  I was able to get it down on the jig in good form.


And, even through the press, using the wonderful little rubber blanket which the PIP printers gave to me.  If you are in the market, I'm sure any printer would be happy to donate a sheet or two.  I just wish PIP used bigger blankets.  A splurge to buy one may be in my future.  We'll see....



I'm pleased!  None of the actual flags will be on purple fabric and this piece is all wonky-wishy.  It is a remnant I found in the bottom of the left-overs box and was a solid color so it was immediately drafted into service.

The fabric ink I had ordered does not roll on and print satisfactorily.  Nor does it paint onto the block and print satisfactorily, therefore I am back to good old oil based etching ink.  It does not stiffen the fabric one iota and should be tough enough to withstand the elements.  I will be trying these out in various parts of the country - if you would like to be a tryer-outer, let me know.  So far, I have one desert dweller and one Northwestern gardner (me).  They will be subjected to blazing hot sun and horrendous hot winds on one side and deluges of water, algae and moss on the other end.  Should they survive one season of this menu I will consider marketing them - otherwise, it is just a fun project and I want them for my garden, anyway.


3 comments:

clive said...

The fabric printers I watched put the blocks on the fabric, not the fabric on the blocks. A board on top should allow you to run it through a press.

I have a t-shirt I did 20+ years ago with letterpress inks, more or less the same as etching inks, and it still looks fine.

Clive

clive said...

The fabric printers I watched put the blocks on the fabric not the fabric on the blocks. a board on top should let you get it through the press.

I used letterpress inks on t-shirts 20+ years ago and they still look okay.

Annie B said...

Lovely image and cool idea! I think the etching ink will hold up fine.